The cameras by pressing the LOC/REM button. The LOC/REM button on the local panel will beįlashing indicating that a remote device has control of the local cameras. Remote control of the cameras connected to the local panel. When the LOC/REM button on the remote panel is pressed, the LED will turn green indicating that you have The remote device can be anotherĬP-ITV control panel, computer, or other control source (AMX, Crestron, etc.) ITV control panel to gain control of the cameras connected to the ITV panel.
This feature allows a remote serial device connected to port 4 of the Systems using the daisy chain connection. The local/remote function can only be used in The LOC/REM allows for control of a remote camera system. To return to auto-exposure mode, depress both bright and dark This function is not presetable and is manually adjusted NOTE: to enter or recall preset shot number 5 use preset buttons 1Īnd 2 simultaneously for number 6 use preset buttons 3 and 4 simultaneously.ĭepress the EXPOSURE switches to adjust the iris. Pan, tilt, zoom, focus, andįocus mode (auto/manual) are memorized. Manufacturer’s cameras preset shots will remain in memory when power is shut off. To RECALL PRESET shot, depress preset switch or switches (1-6) for about a half a second. When the LED for that preset becomes lit the shot is memorized. Switches (1-6) for approximately 2-3 seconds. To ENTER PRESET, position camera to desired video image and depress selected preset shot switch or Move the joystick to test the new response. Slow (SW) buttons while viewing the camera and preset LEDs, the eight speeds correspond to the eight LED While in SPEED SELECTION mode of operation: to set the SPEED SELECTION press the SPEED Fast (FT) and Each time you press a button: SPEED Fast (FT) the speed will increment or SPEED Slow (SW) the (FT) button or SPEED Slow (SW) button will automatically switch to SPEED SELECTION mode and display theĬurrent value. Joystick zoom control the AUTO SPEED value will flash on its indicated LED.
When in AUTO SPEED mode, when selecting a camera or discontinuing the use of the To change the Joy Stick Response Setting operation simultaneously press the SPEED Fast (FT) and Slow (SW)īuttons and hold until you see the camera and preset LEDs flash (approximately 3 seconds) this places the unit One LED will flash, the eight LED positions correspond to the eight speeds (CAM1) is slowest speed and In AUTO SPEED mode all the LEDs will flash, while in SPEED SELECTION mode only the The LEDs will flash onceĭisplaying a code. Momentarily, upon release of the buttons observe the camera and preset LEDs. To display the Joy Stick Response Setting simultaneously press the SPEED Fast (FT) or Slow (SW) buttons The SPEED SELECTION function setting has 8 steps of joy stick response magnitude to affect pan and tilt The current zoom position, with tighter zooms the joystick speeds will be slower allowing for more precise control. The AUTO SPEED function will automatically vary the speed of pan/tilt joystick based on There are two modes of operation AUTO SPEED and SPEED PAN_TILT_ZOOM Joy Stick Response Setting. TILT axis and left and right is the PAN axis. To operate the PAN and TILT movement, use the joystick. Turn counterclockwise for wide viewĪnd clockwise for telephoto view. To operate zoom rotate the joystick knob.
If focus control is activated, the focus function will automatically switchįrom auto to manual to allow for manual focus control, the focus LED will turn off.
Object and the NR to focus a near object. To operate focus, use the FR to focus a far Operate PAN-TILT-ZOOM-FOCUS controls to obtain image desired.
IfĪ VIDEO SWITCH is connected, video output will be on the selected camera. To select another camera press any of the other camera selects. Not present, the LED will blink for 4 seconds. Select CAMERA/VIDEO to be controlled by momentarily pressing the proper button (1 through 4). The port marked 3 is the output for the VIDEO SWITCHER. The port marked 2 is for theĭocument camera (NOT USED). IMPORTANT: Do not barrel DB9 to 8 pin miniDIN to 8 pin mini-DIN to DB9 to make 8 pin mini DIN to 8 pin mini DIN cable. Daisy chain the EVI-D100 cameras from camera 1 through camera 4 using the data inĪnd out connectors on the EVI-D100’s using cables included. The port marked 1 is the output for theĮVI-D100 CAMERAS 1-4. Connect power, camera data, and video switcher cables to rear panel. * For Plenum cab les, use part number CA-ITV-DP-XXX (where XXX=feet). Teleconferencing, Educational, and Security Applications. Pan/Tilt Video Cameras enhances function and value for